On 4/26/2024 9:54 AM, Thomas A. Schmitz wrote:
On 4/26/24 9:30 AM, Thomas A. Schmitz wrote:
And here I am again! Both in mkiv and in mkxl, start/stopregister does
not work when there is already an index entry before. Example below!
All best
Thomas
\setuppapersize [A6]
\starttext
On 4/26/24 9:30 AM, Thomas A. Schmitz wrote:
And here I am again! Both in mkiv and in mkxl, start/stopregister does
not work when there is already an index entry before. Example below!
All best
Thomas
\setuppapersize [A6]
\starttext
A\index{A} B \page
A\startregister [index] {A} B
On 4/25/24 6:27 PM, Thomas A. Schmitz wrote:
Ah, simple typo! After fixing abel to label, startregister gives the
expected results again! Thanks Hans! I may be back with more register
questions soon...
And here I am again! Both in mkiv and in mkxl, start/stopregister does
not work when
confirm it doesn’t result in a page
range in the index. Also gives no error.
Since I've become an expert on tuc files since yesterday (ha!): if I compare the tuc from
a mkiv and a mkxl run, I see that mkiv produces an entry ["lastrealpage"]=9 in
the references table, mkxl doesn't. Th
example, and can confirm it doesn’t result in a
>> page range in the index. Also gives no error.
>
> Since I've become an expert on tuc files since yesterday (ha!): if I compare
> the tuc from a mkiv and a mkxl run, I see that mkiv produces an entry
> ["las
an expert on tuc files since yesterday (ha!): if I
compare the tuc from a mkiv and a mkxl run, I see that mkiv produces an
entry ["lastrealpage"]=9 in the references table, mkxl doesn't. This
appears to be the relevant bit, and it is connected with the replacement
of realpageno by c_
but not in mkxl.
All best
Thomas
\setuppapersize [A6]
\starttext
A\index{A} B\startregister [index] [B] {B}
\dorecurse {10} {\input tufte}
A\index{A} B\stopregister [index] [B]
\page
\placeregister[index]
\stoptext
I’m using it like
\startregister[index][bibliografie]{Bibliografie
Hi all,
has \startregister been superseded in luametatex or is it not yet
implemented? I tried to read strc-reg.lmt but couldn't figure out what
is going on. The following silly minimal test produces the expected
result with mkiv but not in mkxl.
All best
Thomas
\setuppapersize [A6
t |
mtx-context | main context file: /usr/share/tex/texmf-context/tex/context/base/mkiv/context.mkiv
mtx-context | current version: 2024.04.01 08:59
mtx-context | main context file: /usr/share/tex/texmf-context/tex/context/base/mkxl/context.mkxl
mtx-context | current versio
; ConTeXt ver: 2024.01.24 22:39 LMTX fmt: 2024.3.10 int:
english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'C:/Users/adeim/context/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some pat
ts.surfshading.pgfsys-luatex.def
> index 0046daa..b563732 100644
> ---
> a/tex/generic/pgfplots/sys/pgflibrarypgfplots.surfshading.pgfsys-luatex.def
> +++
> b/tex/generic/pgfplots/sys/pgflibrarypgfplots.surfshading.pgfsys-luatex.def
> @@ -61,7 +61,7 @@
> \pgfplotslibrarysurfusepath
> \end
usepath
\endpgfpicture
}%
- \immediate\saveboxresource resources{
+ \saveboxresource resources{
/Pattern << \pgfplots@glob@TMPa >> % write the pattern resource dictionary
}\pgfutil@tempboxa
\leavevmode
diff --git a/tex/context/base/mkxl/util-sbx.lmt
b/tex/context/base/mkxl/util-sbx.
On 3/10/2024 11:48 AM, Wolfgang Schuster wrote:
Hans Hagen via ntg-context schrieb am 10.03.2024 um 10:46:
On 3/10/2024 9:32 AM, Pablo Rodriguez via ntg-context wrote:
On 3/9/24 16:04, Wolfgang Schuster wrote:
Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 19:39:
[...]
Hans Hagen via ntg-context schrieb am 10.03.2024 um 10:46:
On 3/10/2024 9:32 AM, Pablo Rodriguez via ntg-context wrote:
On 3/9/24 16:04, Wolfgang Schuster wrote:
Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 19:39:
[...]
\enableexperiments[fonts.compact]
Which seeems weird to
On 3/10/24 10:46, Hans Hagen via ntg-context wrote:
> [...]
> using the low level commands
>
> \glyphscale
> \glyphxscale
> \glyphyscale
> \glyphslant
> \glyphweight
>
> directly can have side efects when at an outer level these are also set,
> so you need to accumulate, like
> [...]
> which you
On 3/10/2024 9:32 AM, Pablo Rodriguez via ntg-context wrote:
On 3/9/24 16:04, Wolfgang Schuster wrote:
Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 19:39:
[...]
\enableexperiments[fonts.compact]
Which seeems weird to me. Or at least, I thought I read that Hans
enabled it by
On 3/9/24 16:04, Wolfgang Schuster wrote:
> Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 19:39:
>> [...]
>>\enableexperiments[fonts.compact]
>>
>> Which seeems weird to me. Or at least, I thought I read that Hans
>> enabled it by default in LMTX.
>
> AFAIR Hans uses the setting in
Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 19:39:
On 3/8/24 19:09, Wolfgang Schuster wrote:
Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 18:50:
[...]
LMTX gets b, c and d in slanted form.
LuaTeX gets only b and c in slanted form.
[...]
I get b and d in italic which
On 3/8/24 19:09, Wolfgang Schuster wrote:
> Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 18:50:
>> [...]
>> LMTX gets b, c and d in slanted form.
>>
>> LuaTeX gets only b and c in slanted form.
> [...]
> I get b and d in italic which is the expected output.
Sorry, my LuaTeX is getting
Am 08.03.24 um 18:50 schrieb Pablo Rodriguez via ntg-context:
Dear list,
the following latest gets differents results when compiled with MkXL and
MkIV (in current latest from 2024.03.05 11:26):
\definefontfamily[mainface][rm][TeX Gyre Termes]
[features={default, quality
Pablo Rodriguez via ntg-context schrieb am 08.03.2024 um 18:50:
Dear list,
the following latest gets differents results when compiled with MkXL and
MkIV (in current latest from 2024.03.05 11:26):
\definefontfamily[mainface][rm][TeX Gyre Termes]
[features={default, quality
Dear list,
the following latest gets differents results when compiled with MkXL and
MkIV (in current latest from 2024.03.05 11:26):
\definefontfamily[mainface][rm][TeX Gyre Termes]
[features={default, quality},
it={style: regular, features:{default, quality, slanted}},
sl={style
Thank you for your interest, Aditya. The error was kindly fixed by Hans
introducing the following fix at line 993 in
tex/texmf-context/tex/context/base/mkxl/back-exp-imp-mth.lmt:
function extras.msubsup(di,element,n,fulltag)
local data = di.data
local nuc = found(data
∑
tex error > tex error on line 85 in file ./IntroEstadísticaNP.tex:
lua error:
registered function call [250]:
...mtx/tex/texmf-context/tex/context/base/mkxl/lxml-mms.lmt:750: attempt to
index a nil value (local 'a2')
stack traceback:
...mtx/tex/texmf-context/
il.com>) escribió:
>
>> I keep bumping into this error, I have no idea what may be causing it, in
>> a statistics book with lots of math:
>>
>> registered function call [250]:
>> ...mtx/tex/texmf-context/tex/context/base/mkxl/lxml-mms.lmt:749: attempt to
>>
onr...@gmail.com>) escribió:
> I keep bumping into this error, I have no idea what may be causing it, in
> a statistics book with lots of math:
>
> registered function call [250]:
> ...mtx/tex/texmf-context/tex/context/base/mkxl/lxml-mms.lmt:749: attempt to
> index a nil value (local
I keep bumping into this error, I have no idea what may be causing it, in a
statistics book with lots of math:
registered function call [250]:
...mtx/tex/texmf-context/tex/context/base/mkxl/lxml-mms.lmt:749: attempt to
index a nil value (local 'a2')
I have checked everything. I have tried
2023). In ConTeXt
terms, this is almost ancient (»uralt«).
ConTeXt MkII used pdfTeX as engine. In MkIV, the engine is LuaTeX. The
latest engine is LuaMetaTeX for what is named either LMTX or MkXL.
The format file is for pdfLaTeX, so ConTeXt cannot really do anything
with it. It is consistent that
ntext | main context file:
>> /Applications/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
>> mtx-context | current version: 2024.01.24 22:39
>> mtx-context | main context file:
>> /Applications/ConTeXtStandalone/tex/texmf-context/tex
-context | main context file:
/Applications/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2024.01.24 22:39
--
Stripped down MWE:
\setuppapersize[A4] [A4]
\starttext
\completecontent[criterium=all]
% ToC
\page
\chapter{CHAP 1}
TEXT
/context/base/mkiv/context.mkiv
>> mtx-context | current version: 2024.01.24 22:39
>> mtx-context | main context file:
>> /Applications/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkxl/context.mkxl
>> mtx-context | current version: 2024.01.24 2
ontext file:
> /Applications/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkiv/context.mkiv
> mtx-context | current version: 2024.01.24 22:39
> mtx-context | main context file:
> /Applications/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkxl/con
/ConTeXtStandalone/tex/texmf-context/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2024.01.24 22:39
--
Stripped down MWE:
\setuppapersize[A4] [A4]
\starttext
\completecontent[criterium=all]
% ToC
\page
\chapter{CHAP 1}
TEXT
\startbackmatter
\startchapter[title=Literature
sing the following file:
>
>
>
> \starttext
> \input knuth
> \stoptext
>
>
>
> On Tue, Jan 16, 2024 at 5:30 PM luigi scarso
> wrote:
>
>
>
>
>
> On Tue, 16 Jan 2024 at 12:49, Shiv Shankar Dayal <
> shivshankar.da...@gmail.com> wrote:
>
lto:shivshankar.da...@gmail.com>> wrote:
Please paste line no. 238 of your input file.
On Tue, Jan 16, 2024 at 4:11 PM Ursula Hermann
mailto:ursula.herm...@univie.ac.at>> wrote:
Dear List,
After Compiling in the Folder:
This is LuaMetaTeX, Version 2.10.11 initex
(C:/Users/Herman
t; \input knuth
> \stoptext
>
>
>
> On Tue, Jan 16, 2024 at 5:30 PM luigi scarso
> wrote:
>
>
>
>
>
> On Tue, 16 Jan 2024 at 12:49, Shiv Shankar Dayal <
> shivshankar.da...@gmail.com> wrote:
>
> Please paste line no. 238 of your input file.
/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-
en.mkxl(context.mkxl(syst-ini.mkxl
! Undefined control sequence.
\immutable\defcsname\tocharacter
\tabasciicode \endcsname {\ } % \def\^^I{\ } tab
maybe I am wrong, but this looks like an error
mann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-
en.mkxl(context.mkxl(syst-ini.mkxl
! Undefined control sequence.
\immutable\defcsname\tocharacter
\tabasciicode \endcsname {\ } % \def\^^I{\ } tab
maybe I am wrong, but this looks like an error of syst-ini.mkxl
tem > ConTeXt ver: 2024.01.08 11:23 LMTX fmt: 2024.1.16
int: english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'/home/gerion/context/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
gt;>> When the alignment in maths changed I changed the above definition to the
>>>> following:
>>>>
>>>> \definemathsimplealign[alignedcases]
>>>> [left={\startmathfenced[cases]},
>>>> right=\stopmathfenced,
>>>> align={1:ri
, I may post a message there.Thanks in advance, and best regards: Otared<240117-1.mkxl><240117-1.pdf>
Otared Kaviane-mail: ota...@gmail.comPhone: +33 6 88 26 70 95
___
If your question is of interest to o
Please paste line no. 238 of your input file.
On Tue, Jan 16, 2024 at 4:11 PM Ursula Hermann
mailto:ursula.herm...@univie.ac.at>> wrote:
Dear List,
After Compiling in the Folder:
This is LuaMetaTeX, Version 2.10.11 initex
(C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/cont
Folder:
>>>
>>>
>>>
>>> This is LuaMetaTeX, Version 2.10.11 initex
>>>
>>> (C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-
>>> en.mkxl(context.mkxl(syst-ini.mkxl
>>> ! Undefined control sequ
>>
>>
>> After Compiling in the Folder:
>>
>>
>>
>> This is LuaMetaTeX, Version 2.10.11 initex
>>
>> (C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-
>> en.mkxl(context.mkxl(syst-ini.mkxl
>> ! Undefined contr
Please paste line no. 238 of your input file.
On Tue, Jan 16, 2024 at 4:11 PM Ursula Hermann
wrote:
> Dear List,
>
>
>
> After Compiling in the Folder:
>
>
>
> This is LuaMetaTeX, Version 2.10.11 initex
>
> (C:/Users/Hermann/Downloads/context-mswin/tex/texmf-c
Dear List,
After Compiling in the Folder:
This is LuaMetaTeX, Version 2.10.11 initex
(C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-
en.mkxl(context.mkxl(syst-ini.mkxl
! Undefined control sequence.
\immutable\defcsname\tocharacter
\tabasciicode
://yemaya.fiee.net/s/8TqwfcP7mLMmy9p
(In a simple document it works.)
Hraban
"""
lua error > lua error on line 516 in file de/c_feinheiten.tex:
registered function call [1565]:
...xmf-context/tex/context/base/mkxl/lpdf-fix-imp-fonts.lmt:596: attempt
to index a nil value (fie
inbetween.
2. Don't add the "MkXL" bit - it's a distracting detail that no one needs to know at this
stage. Also it looks like "Mk 40" in Roman numerals, or extra large.
ok. But “extra large” is intentional, I guess.
3. I though Hans had stopped using the TeX styl
e.g. what is the distinction between the 'source' (lua tex) and the
> 'resources' (fonts icc lib) and the 'frontend' (tex xml png ...mp)
> (no lua?)
Agreed.
In no particular order:
1. "ConTeXt" should be the biggest word - or as an obvious title for the
poster, away from the
Here’s a preliminary schema of LMTX. What do you think?
Is there something important missing?
Maybe add mtxrun, hyphenation patterns, modules. Move the images to the
resources?
Maybe I should replace the “files” within MkXL with the parts like
parser, par builder and whatever?
I don’t want
white 1mm thick border in a Metapost
>> label. Here is my code, which doesn't draw the border at all and which draws
>> the text in white instead of black (I'm using mkiv and mkxl version
>> 2023.09.26 18:19 on osx-arm6):
>> |
>> |beginfig(1);
>> %
Am 19.11.23 um 16:41 schrieb Emanuel Han via ntg-context:
I'd like to surround black text with a white 1mm thick border in a
Metapost label. Here is my code, which doesn't draw the border at all
and which draws the text in white instead of black (I'm using mkiv and
mkxl version 2023.09.26 18
I'd like to surround black text with a white 1mm thick border in a Metapost
label. Here is my code, which doesn't draw the border at all and which draws
the text in white instead of black (I'm using mkiv and mkxl version 2023.09.26
18:19 on osx-arm6):
beginfig(1);
% Define the text and colors
is
actually at.
In any case, you can try the "name" mode, which forces the use of
destination names (i.e. "/D (...)"):
% both inner and outer references in name mode
\setupinteraction[page=name]
% inner default (auto mode) and outer name mode
\setupinteraction[page
ce > level 1, order 1, name
'/usr/share/texmf/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded from cont-new.mkiv
close source> level 1, order 1, name
'/usr/share/texmf/tex/context/base/mkxl/cont-new.mkxl'
system > files > jobname
> 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'C:/texlive/2023/texmf-dist/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded from cont-new.mkiv
close source > level 1, order 1, name
'C:/texlive/2023/texmf-dist/tex/cont
ase/mkxl/math-fnt.lmt:56: table
index is nil
stack traceback:
...ext/tex/texmf-context/tex/context/base/mkxl/math-fnt.lmt:56: in
metamethod 'index'
...ext/tex/texmf-context/tex/context/base/mkxl/math-fnt.lmt:104: in
function <...ext/tex/texmf-context/tex/context/base/mkxl/math-fnt.
install-lmtx/context-linux-64.zip) and I got
the same error again.
Just in case it might help,
Pablo
PS: here is the error again:
tex error > tex error on line 10 in file ./a.tex:
lua error:
run callback [44]:
...ext/tex/texmf-context/tex/context/base/mkxl/math-fnt.lmt:56: tab
} i = j \NR
> \NC 0 \NC \text{otherwise} \NR
> \stopmathcases
> \stopformula
> \stoptext
>
> The error is :
> run callback [44]:
> ...ext/tex/texmf-context/tex/context/base/mkxl/math-fnt.lmt:56: table index
> is nil\nstack traceback:\n
> ...ext/tex/texmf-context/t
\startformula
\delta_{ij} =
\startmathcases
\NC 1 \NC \text{if } i = j \NR
\NC 0 \NC \text{otherwise} \NR
\stopmathcases
\stopformula
\stoptext
The error is :
run callback [44]:
...ext/tex/texmf-context/tex/context/base/mkxl/math-fnt.lmt:56: table index
is nil\nstack traceback:\n
...ext/tex/texmf
rtinus/LibertinusSerif-Regular.otf',
hash 'libertinusserif-regular'
otf reader > fatal error in file
'G:/ConTeXt_LMTX/tex/texmf/fonts/data/public/libertinus/LibertinusSerif-Regular.otf':
...MTX/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:2160:
attempt to perform a
> level 1, order 1, name
'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded from cont-new.mkiv
close source> level 1, order 1, name
'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-contex
was added for this
purpose.
Thank you!
You’re right, that might be enough.
(Documented only in https://wiki.contextgarden.net/Command/setuphead
so far. Even the source browser can’t find anything.)
https://source.contextgarden.net/tex/context/base/mkxl/page-inj.mklx
Seems like I didn’t search
, that might be enough.
(Documented only in https://wiki.contextgarden.net/Command/setuphead
so far. Even the source browser can’t find anything.)
https://source.contextgarden.net/tex/context/base/mkxl/page-inj.mklx
But my “image” consists of a background color (with bleed), a
transparent overlay
ystem >
system > ConTeXt ver: 2023.09.03 19:03 LMTX fmt: 2023.9.4 int:
english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base
23.09.03 19:03 LMTX fmt: 2023.9.4 int:
english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded fr
lish/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded from cont-new.mkiv
close source
82 of font-pre.mkiv:
\definefontfeature
[smallcaps]
[always]
[smcp=yes,
tlig=yes,
trep=yes] % texligatures=yes,texquotes=yes
Just in case it helps, grep is a useful tool when applied to
tex/texmf-context/tex/context/base/mkxl (or
/tex/texmf-context/tex/context/base/mkiv, if needed).
Che
lso in lines 77-82 of font-pre.mkiv:
\definefontfeature
[smallcaps]
[always]
[smcp=yes,
tlig=yes,
trep=yes] % texligatures=yes,texquotes=yes
Just in case it helps, grep is a useful tool when applied to
tex/texmf-context/tex/context/base/mkxl (or
/tex/texmf-context/tex/conte
cument.
>
> Wolfgang
>
system >
system > ConTeXt ver: 2023.08.15 18:48 LMTX fmt: 2023.8.15 int:
english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'/home/xan/bin/context-current/tex/
MTX fmt: 2023.8.14 int:
english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'/home/xan/bin/context-current/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded from cont-
Xavier
>
> PS: I use context version:mtx-context | ConTeXt Process Management 1.04
> mtx-context |
> mtx-context | main context file:
> /usr/share/texmf-dist/tex/context/base/mkiv/context.mkiv
> mtx-context | current version: 2023.03.10 12:15
> mtx-context
er tex-mp communication tricks but these are
not yet documented in the manual. Contrary to mkii (intermediate as well
as runtime processing) and mkiv (runtime two pass in a run processing)
we can make some interfaces a bit simpler in mkxl but that happens
stepwise because we need to remain compatible.
version:mtx-context | ConTeXt Process Management 1.04
> mtx-context |
> mtx-context | main context file:
> /usr/share/texmf-dist/tex/context/base/mkiv/context.mkiv
> mtx-context | current version: 2023.03.10 12:15
> mtx-context | main context file:
> /usr/share/
context file:
/usr/share/texmf-dist/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2023.03.10 12:15
c.pdf
Description: Adobe PDF document
___
If your question is of interest to others as well
|
mtx-context | main context file:
/usr/share/texmf-dist/tex/context/base/mkiv/context.mkiv
mtx-context | current version: 2023.03.10 12:15
mtx-context | main context file:
/usr/share/texmf-dist/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2023.03.10 12:15
via
ab.mkxl, you replace \lastchknumber with
#2 (as it seems it was in older releases, e.g.
https://source.contextgarden.net/tex/context/base/mkxl/lang-lab.mkxl?search=lang-lab),
it works again. Anyway, let's wait fo
ash
'tex::cont-en.mkxl'
resolvers | formats | using tex source file
'/usr/local/share/texmf-dist/tex/context/base/mkxl/cont-en.mkxl'
resolvers | formats | using lua stub file
'/usr/local/share/texmf-dist/tex/context/base/mkxl/luat-cod.lmt'
resolvers | formats | changing to for
xmf-dist/tex/context/base/mkiv/context.mkiv
> mtx-context | current version: 2023.03.10 12:15
> mtx-context | main context file:
> /usr/local/texlive/2023/texmf-dist/tex/context/base/mkxl/context.mkxl
> mtx-context | current version: 2023.03.10 12:15
Tikz (and rela
mtx-context | main context file:
/usr/local/texlive/2023/texmf-dist/tex/context/base/mkiv/context.mkiv
mtx-context | current version: 2023.03.10 12:15
mtx-context | main context file:
/usr/local/texlive/2023/texmf-dist/tex/context/base/mkxl/context.mkxl
mtx-context | current ve
On 7/20/2023 4:04 PM, Thomas A. Schmitz wrote:
Hi everybody,
The latest (2023.07.18 22:07) has a consistent problem with all files on my
computer; every run has this:
fatal lua error:
registered function call [1715]:
...s/lmtx/tex/texmf-context/tex/context/base/mkxl/l-lua.lmt:84: attempt
Hi everybody,
The latest (2023.07.18 22:07) has a consistent problem with all files on my
computer; every run has this:
fatal lua error:
registered function call [1715]:
...s/lmtx/tex/texmf-context/tex/context/base/mkxl/l-lua.lmt:84: attempt to call
a nil value (upvalue 'popen’)
Does anyone
:
[C]: in function 'string.format'
?: in field '?'
...m64/tex/texmf-context/tex/context/base/mkxl/luat-log.lmt:184: in
upvalue 'report'
...m64/tex/texmf-context/tex/context/base/mkxl/luat-log.lmt:397: in
upvalue 'report'
...m64/tex/texmf-context/tex/context/base/mkxl/spac-pas.lmt:156
he same results every time
and here is the log
system >
system > ConTeXt ver: 2023.06.04 18:58 LMTX fmt: 2023.6.5 int:
english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'/context-lmtx-2
pdf/PDF32000_2008.pdf#search=ExportState):
The attached patch fixes this issue.
Many thanks for your help,
Pablo
--- lpdf-ren.lmt 2023-06-23 20:08:17.096662826 +0200
+++ mkxl/lpdf-ren.lmt 2023-06-23 20:09:05.358959481 +0200
@@ -78,8 +78,8 @@
}
local pdf_export = {
-[v_yes] = pdf_on,
-[v_no]
possibly identical,
isn't it? and it could also inarguably apply to the circumstances as
well. Don't you think?
no it isn't, its building upon hat is there:
mkii -> mkiv -> mkxl
(pdf)tex -> luatex -> luametatex
I mean, it's like comparing oranges with apples, and mkii with m
t; mtx-install-modules | wiping 0 files in 'doc/latex/**'
> mtx-install-modules | wiping 0 files in 'doc/plain/**'
> mtx-install-modules | wiping 148 files in 'doc/generic/**'
> mtx-install-modules | wiping 0 files in 'source/latex/**'
> mtx-install-modules | wiping 0 files in 'source/plain
les in 'source/plain/**'
mtx-install-modules |
mtx-install-modules | renewing file database
mtx-install-modules |
mtx-install-modules | installed: tikz
mtx-install-modules |
system > beware: some patches loaded from cont-new.mkiv
close source > level 1, order 1, name
'~/tex/te
>
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'/home/vm/context/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system > beware: some patches loaded from cont-new.mkiv
close source> level 1, order 1, name
'/home/v
/context/tex/texmf-context/tex/context/base/mkiv/context.mkiv
mtx-context | current version: 2023.05.08 17:39
mtx-context | main context file:
/home/berend/context/tex/texmf-context/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2023.05.08 17:39
You never
mtx-context | current version: 2023.05.08 17:39
mtx-context | main context file:
/home/berend/context/tex/texmf-context/tex/context/base/mkxl/context.mkxl
mtx-context | current version: 2023.05.08 17:39
--
All the best,
Berend de Boer
otf reader > unsupported colr type 2 paint format %i
otf reader > fatal error in file 'Noto-COLRv1.ttf':
...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3575: table index is
nil
stack traceback:
...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2344: in
me
> fatal error in file 'Noto-COLRv1.ttf':
...ext/tex/texmf-context/tex/context/base/mkxl/font-dsp.lmt:3575: table index
is nil
stack traceback:
...ext/tex/texmf-context/tex/context/base/mkiv/font-otr.lua:2344: in
metamethod 'newindex'
...ext/tex/texmf-context/tex/context/base
On 4/30/23 20:17, Hans Hagen via ntg-context wrote:
> On 4/30/2023 3:19 PM, Pablo Rodriguez via ntg-context wrote:
>> […]
>> When I try to create the format file with "context --make --all", I get
>> the following error message:
>> […]
>> token call
lowing error message:
lua error > lua error on line 645 in file context.mkxl:
token call, execute: ...ext/base/mkxl/cldf-pos.lmt:18: attempt to index
a nil value (global 'posit') stack traceback:
you're r
file with "context --make --all", I get
> the following error message:
>
> lua error > lua error on line 645 in file context.mkxl:
>
> token call, execute: ...ext/base/mkxl/cldf-pos.lmt:18: attempt to index
> a nil value (global 'posit') stack traceback:
>
45 in file context.mkxl:
token call, execute: ...ext/base/mkxl/cldf-pos.lmt:18: attempt to index
a nil value (global 'posit') stack traceback:
...ext/base/mkxl/cldf-pos.lmt:18: in local 'code'
...ext/base/mkiv/util-lua.lua:96: in field 'loadedluacode'
...ext/base/mkiv/lua
ame: 'CHANGELOG',
lower: 'changelog', already: 'ChangeLog'
system >
system > ConTeXt ver: 2023.04.27 17:04 LMTX fmt: 2023.4.28
int: english/english
system >
system > 'cont-new.mkxl' loaded
open source > level 1, order 1, name
'/home/vm/context/t
nd
> m-tikz-pgfplotstable.tex) in the right spot
> (tex/texmf-context/tex/context/modules/mkxl) and run "mtxrun --generate”. I’m
> not sure if I was also supposed to put the third file from the earlier email
> in this spot also, but I didn’t, and it works.
>
> I am still gettin
module fails. Not sure why this
is happening:
\usemodule[circuitikz]
gives:
tex error > tex error on line 77 in file
/opt/luametatex/texmf-context/tex/context/modules/mkxl/m-circuitikz.mkxl:
Package pgfkeys Error: I do not know the key '/tikz/resistor', to which you
passed 'ame
1 - 100 of 366 matches
Mail list logo